ERROR: Could not find a version that satisfies the requirement boto==\"2.48.0\"


Could you please kindly help and suggestions about my issue while I installing Analytic using this command.
(ansible) root@EdxNative:~/configuration/playbooks# ansible-playbook -i localhost, -c local analytics_single.yml --extra-vars “INSIGHTS_LMS_BASE=$LMS_HOSTNAME INSIGHTS_BASE_URL=$INSIGHTS_HOSTNAME” -vv

ERROR: Could not find a version that satisfies the requirement boto==“2.48.0” (from versions: 0.8d, 0.9d, 1.5d, 1.8d, 0.2a0, 0.3a0, 0.4a0, 0.4b0, 0.5a0, 0.6a0, 0.6b0, 0.6rc0, 0.7a0, 0.8a0, 0.8b0, 0.8rc0, 0.9a0, 0.9b0, 0.9rc0, 1.0a0, 1.1a0, 1.1b0, 1.1rc0, 1.2a0, 1.3a0, 1.4a0, 1.4b0, 1.4rc0, 1.5rc0, 1.6a0, 1.6b0, 1.7a0, 1.8a0, 1.8b0, 1.8rc0, 1.9a0, 1.9b0, 2.0a1, 2.0a2, 2.0b1, 2.0b2, 2.0b3, 2.0b4, 2.0rc1, 2.0, 2.1.0, 2.1.1, 2.2.0, 2.2.1, 2.2.2, 2.3.0, 2.4.0, 2.4.1, 2.5.0, 2.5.1, 2.5.2, 2.6.0, 2.7.0, 2.8.0, 2.9.0, 2.9.1, 2.9.2, 2.9.3, 2.9.4, 2.9.5, 2.9.6, 2.9.7, 2.9.8, 2.9.9, 2.10.0, 2.11.0, 2.12.0, 2.13.0, 2.13.3, 2.14.0, 2.15.0, 2.16.0, 2.17.0, 2.18.0, 2.19.0, 2.20.0, 2.20.1, 2.21.0, 2.21.1, 2.21.2, 2.22.0, 2.22.1, 2.23.0, 2.24.0, 2.25.0, 2.26.0, 2.26.1, 2.27.0, 2.28.0, 2.29.0, 2.29.1, 2.30.0, 2.31.0, 2.31.1, 2.32.0, 2.32.1, 2.33.0, 2.34.0, 2.35.0, 2.35.1, 2.35.2, 2.36.0, 2.37.0, 2.38.0, 2.39.0, 2.40.0, 2.41.0, 2.42.0, 2.43.0, 2.44.0, 2.45.0, 2.46.0, 2.46.1, 2.47.0, 2.48.0, 2.49.0)\nERROR: No matching distribution found for boto==“2.48.0”\n"}

Thanks for your attention.

This is the detail error message of my issue.

1 Like

Hi @aungmyatthu,

I don’t have much idea regarding this

but can you execute your command using sudo ?

And one more thing, you have activated ansible environment, you can try the command without activating the environment. Try here:

cd /var/tmp/configuration/playbooks/

Maybe this will help.

Hello Jramnai,

It works. Thank you so much for your help. However we can run that command and Open edx Analytic page is appear, we have an issue “404 Page not found”. May I know your suggestion about that error?

Check step 7 here.
This will help you.

Hello Jramnai,

Sorry for my late response since we waited our dev team working. As your suggestion, we got this output after we ran step 6. But, the 404 error is still showing.

I remove this " - - client_id YOUR_OAUTH2_KEY - - client_secret secret" from command because we don’t know auth2 key. I don’t know how to check it. Do we need to do step 4 and 5 of your link?

Please check the command output.

Thank you for your patient help. Please help and suggestion about our problem.

Hi @jramnai,

Please help me with this problem. We have still remain a problem. Any other suggestion for this service. Thanks.

Ye Pyae Aung

@axay.javiya, can you look into this?

1 Like

Hello @Yepyae,

You can follow below link to configure Oauth for your Insights but, Make sure your Insights installation version must match with LMS version:


Hello @axay.javiya,

We follow your link, but we facing another error as below. Please check. Thanks.

Hello @axay.javiya,

After we changed your step and we faced another error as below. Please check and point out our issue. Thanks.

Best Regards,
Ye Pyae Aung

Please start a new topic for new problems. If you are seeing “500” errors, look for the corresponding server logs.